رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
Between 0.719 inches and 0.781 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
Between 0.484 inches and 0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 3.047 inches and 3.063 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.495 inches and 1.497 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.406 inches and 0.422 inches
MRC:
A measurement from the bottom of the mounting hole to the surface of the item.ACJD
Mounting Hole Depth:
Between 0.984 inches and 1.000 inches
MRC:
A measurement of the longest dimension of the beveled edge of the key,in distinction from width.ACJF
Key Chamfer Length:
0.063 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmk
MRC:
The distance from the center of the mounting hole to the end of the item.CRYW
Distance From Mounting Hole Center To End:
0.693 inches
MRC:
The physical configuration of the starting edge of the item.CSPJ
Starting Edge Shape:
Chamfered
MRC:
The included angle of the beveled edge of the key.CSXB
Key Chamfer Angle:
45.0 degrees
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
1 unthreaded-counterbored
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
