رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Bracket, interlock receiver
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
6.630 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
7.000 inches
Second Leg Width:
7.000 inches
Second Leg Hole Diameter:
Between 4.101 inches and 4.102 inches
Second Leg Distance From Edge To Hole Center Along Width:
3.125 inches
Second Leg Distance From Edge To Hole Center Along Length:
3.125 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.750 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
1.830 inches
First Leg Width:
6.250 inches
Second Leg Side Radius:
3.130 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
No hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Side radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Top plate (first leg) is 7.0 x 7.0 with front left corner rounded to radius of 3.130 and with piece 3.88 w x 8.50 l x 0.75 thk attached at angle to right edge - see drawing for details; back plate (second leg) is 6.25 w x 6.63 h x 0.75 thk and is attached to back edge of top flush with left edge, leaving 0.75 in. Gap at right edge
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-t-9046, comp a-b, condition annealed military specification single material response or -mil-t-9047, comp ti-6al- 4v, eli, condition annealed military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer and paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-24441/29 military specification 1st treatment response and mil-p-24441/31 military specification 2nd treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
