رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
# packager options so lo EA
معلومات الجزء
Cable assembly, semi-rigid sma (m) / sma (m)
TXT
وصف:
Radio Frequency Cable Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
15.250 inches
MRC:
A measure of the opposition to the flow of electrical current.AAPP
Electrical Resistance:
50.0 ohms impedance
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.005 inches 1st conductor
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius and 125.0 degrees celsius
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.0141 inches 3rd conductor
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aw9 opts; chassis, electrical
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Connector plug all ends all conductors
MRC:
The number of electrical conductors included on the item.AMQN
Conductor Quantity:
3
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Solid, tubular 2nd conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Solid, tubular 3rd conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Solid 1st conductor
MRC:
The geometric configuration of the conductor when viewed in cross-section.CXDM
Conductor Cross-sectional Shape:
Tubular solid 3rd conductor
MRC:
The arrangement and number of arrangements of the conductors.CXDQ
Conductor Arrangement And Quantity:
1 coaxial
MRC:
The identifying reference number assigned to the terminal(s) by the manufacturer.CXGG
Terminal Manufacturer Identifying Reference Number:
228635-1 all ends all conductors
MRC:
The five-position commercial and government entity code for the manufacturer of the terminal.CXGN
Terminal Commercial And Government Entity Code:
00779 all ends all conductors
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Scable is m17/130-00005; has 4 identification markers: one marked : to" above "j2", one "w2" above "20419assy734227-3", one "to" above "a2-j2", and one with mfr's ref. No; assembly has 2 rounded 90 degrees bends and one right angle bend
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper 2nd position secondary insulation third conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polytetrafluoroethylene 1st position primary insulation second conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel core conductor first conductor
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Plating on copper coating of first conductor silver
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Copper core coating first conductor and silver core coating first conductor
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin 2nd position coating third conductor
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
External connectors
