رقم الجزء 7347713

Access Cover

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 315.18 and 425.493 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
7347713
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
007347713

معلومات الجزء
One square cornered tab 1-1/4 in.By 3/4 in. Located 13/32 in. Below centerline and extending 27/32 in.Above centerline, 3/8 in. Radius at base of tab

NSN
رقم المخزون الوطني:
5340-00-734-7713 5340007347713
TXT
وصف:
Access Cover
INC
INC
رمز اسم العنصر:
29785
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular recess
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
3.875 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
1.063 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.375 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Four radii sides, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.563 inches
MRC:
None.ADNX
Body Radius:
2.750 inches
MRC:
None.ADNY
Distance Between Holes Along Length:
3.875 inches
MRC:
None.ADNZ
Distance Between Holes Along Width:
3.875 inches
MRC:
None.ADPC
Distance From First Hole Centerline To End Along Length:
0.875 inches
MRC:
None.ADPD
Distance From First Hole Centerline To End Along Width:
0.875 inches
MRC:
None.ADPG
Ear Radius:
0.531 inches
MRC:
None.ADPN
First Recess Inside Height:
1.094 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.563 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.188 inches
MRC:
None.ADPT
First Recess Diameter:
3.875 inches
MRC:
None.ADPW
Outside Corner Radius:
0.375 inches
MRC:
None.ADPX
Body Outside Radius:
0.375 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nw/s: truck, tractor, 5-ton (m818, m931); truck, cargo, dropside, 5-ton, 6x6 (m813a1, m-923, m-925); truck, dump, 5-ton, 6x6 (m929, m930); crane, truck mounted, hyl 25-ton cat (cce); truck, cargo, 5-ton, 6x6, xlwb w/e
MRC:
None.CWCJ
Inside Angle:
65.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Transmission, truck

{lang[cimilar]} Access Covers

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى