رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Oone positioning hole 0.334 in. Diameter on second leg 0.830 from bottom and 3.368 in. From left edge two pins part no. 539896 fscm 73030 inserted in second leg 0.660 and 6.380 in. From left end and 0.500 in. From bottom
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.160 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.310 inches
Second Leg Width:
8.000 inches
First Leg Hole Diameter:
Between 0.270 inches and 0.277 inches
Second Leg Hole Diameter:
Between 0.270 inches and 0.277 inches
Second Leg Distance Between Hole Centers Along Width:
4.760 inches
Second Leg Distance Between Hole Centers Along Length:
0.180 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.120 inches and 0.130 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.120 inches and 0.130 inches
First Leg Width:
8.000 inches
First Leg Distance Between First And Second Hole Centers Along Width:
2.460 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
2.300 inches
First Leg Distance From Edge To Hole Center Along Width:
0.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.435 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 4027 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
