رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.016 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.438 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 8.922 inches and 8.953 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.248 inches and 0.250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 3.748 inches and 3.749 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 3.749 inches and 4.003 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.469 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
Not rated
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 4.062 inches and 4.065 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
An indication of whether or not a valve recess(es) is included.BPPS
Valve Recess:
Not included
MRC:
An indication of whether or not a top inside chamfer is included.BPPT
Top Inside Chamfer:
Included
MRC:
An indication of whether or not a bottom inside chamfer is included.BPPW
Bottom Inside Chamfer:
Not included
MRC:
An indication of whether or not a top intake port is included.BPPX
Top Intake Port:
Included
MRC:
An indication of whether or not an intake hole(s) is included.BQBF
Intake Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Cast iron
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Cast iron
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Dry, flanged, relieved
