رقم الجزء 74A231320-1005

Headed Grooved Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 2694 and 3636.9 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
74a231320-1005
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014716696

معلومات الجزء
Pin, hinge, lower

NSN
رقم المخزون الوطني:
5315-01-471-6696 5315014716696
TXT
وصف:
Headed Grooved Pin
INC
INC
رمز اسم العنصر:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.4375 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
6.854 inches
MRC:
None.ABPA
Undercut Diameter:
0.3125 inches
MRC:
None.ABPB
Under Head Length:
7.238 inches
MRC:
None.ABPC
Undercut Width:
0.064 inches
MRC:
None.ABPD
Second Undercut Width:
0.040 inches
MRC:
None.ABPF
Second Undercut Diameter:
0.3125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.070 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.108 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-18 aircraft
MRC:
None.AMCS
First End Taper Length:
0.031 inches
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
0.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Xhead drilled for zerk fitting, 0.250-28 unf-3b per mil-s-7742 with 0.187" fullthread depth.Non head end drilled for lockwire, also threaded 0.3125-24 unjf-3b per mil-s-8879. Contains 6 special holes for lubing hinge, 0.094"
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.380 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headed Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى