رقم الجزء 74A733006-2001

Headed Straight Pin

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 2628.52 and 3548.502 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
74a733006-2001
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011345946

معلومات الجزء
Notch in head 0.531 in. Lg and 0.248 in. Min, 0.2485 in. Maximum deep, parallel with slot

NSN
رقم المخزون الوطني:
5315-01-134-5946 5315011345946
TXT
وصف:
Headed Straight Pin
INC
INC
رمز اسم العنصر:
02384
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.060 inches
MRC:
The distance,measured along a straight line perpendicular to the longitudinal axis of the slot,from one edge to the other.ABGC
Slot Width:
Between 0.125 inches and 0.135 inches
MRC:
A measurement of the longest dimension of the slot,in distinction from width.ABGD
Slot Length:
0.499 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.4346 inches and 0.4356 inches
MRC:
None.ABPB
Under Head Length:
1.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
Between 0.125 inches and 0.131 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.187 inches
MRC:
None.CQPJ
Pin Chamfer Angle:
Between 43.0 degrees and 47.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
Between 0.622 inches and 0.623 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.812 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp xm-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5629 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight

{lang[cimilar]} Headed Straight Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى