رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Molded continuous ring gasket
TXT
وصف:
Nonmetallic Special Shaped Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Special
MRC:
The smallest measurement taken at right angles to the length of an item,in distinction from thickness.ABNH
Minor Width:
0.194 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
29.900 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.170 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.380 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.435 inches
MRC:
A minor measurement from the bottom to the top of an object,in distinction from depth.ADWK
Minor Height:
0.322 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Torpedo tube
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Cross-sectional width (base) is angled @ 5 degrees from one side to the other
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber ethylene-propylene class epm
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-g-19769, gr-80 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Circular
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
Mil-g-19769 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349 - mil-g-19769 government specification
