رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Outside of hubs cadmium or zinc plated
TXT
وصف:
Flexible Shaft Coupling
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.125 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.938 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
0.6220 inches both ends and 0.6230 inches both ends
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.1865 inches first end and 0.1878 inches first end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.1865 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.0953 inches both ends and 0.0968 inches both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.6240 inches both ends and 0.6250 inches both ends
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.0000 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered first end
MRC:
Indicates the design type of the item.APGF
Design Type:
Insert
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
0.7470 inches both ends and 0.7480 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the insert is fabricated.CQZG
Insert Material:
Zinc
