رقم الجزء 752-7068482-92

Plastic Round Section

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 26.18 and 35.343 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
752-7068482-92
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
No qup EA
NIIN:
014820201

معلومات الجزء
Strip, wear

NSN
رقم المخزون الوطني:
9330-01-482-0201 9330014820201
TXT
وصف:
Plastic Round Section
INC
INC
رمز اسم العنصر:
39096
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Circular
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Extruded
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
85.0 shore durometer d
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
7977 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
180.0 degrees fahrenheit
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.880 inches
MRC:
The condition of the item with respect to the texture of the surface.ADTX
Surface Condition:
Smooth outside periphery
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
1.000 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Drill four holes per drawing; remove burrs and sharp edges
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, acetal and plastic, polytetrafluoroethylene
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic alkyd and plastic melamine and plastic polytetrafluoroethylene

{lang[cimilar]} Plastic Round Sections

« Plastics Fabricated Materials {lang[catalog]}
قارن الآن»
واضح | أخفى