رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
754-7068540-a5
معلومات الجزء
Splines are modified 10 splines with one tooth not machined, for total of 9 teeth. This part is an assembly of nsn: 3040-01-500-1764 and sleeve p/n 754-7068540-23 cage 53711
TXT
وصف:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 4.997 inches and 5.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.700 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
9
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ejection system high efficiency inlet linkage assembly for seawolf class ssn
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
2.875 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
20.000 inches
Shaft End Thickness:
Between 4.525 inches and 4.535 inches
Link End Thickness:
Between 2.515 inches and 2.520 inches
Link End Hole Diameter:
2.875 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286 form-7 condition: annealed & age hardened federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat, one hole link end
