رقم الجزء 757-3936-001

Shouldered Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 10.8 and 14.58 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
757-3936-001
تجريد:
Yes - DEMIL/MLI
صلاحيه:
N/A
وحدة القياس:
10 EA
NIIN:
004298633

معلومات الجزء
Second end style chamfered 0.031 x 45.0 degrees porm 3.0 deg; finish passivate, type ii per qq-p-35 (collins 580-0025-00), flatted end externally threaded 0.250-28unf-2a, 1.125 full thread 0.125 thd runout, item internally threaded 0.138-32 unc-2b, 0.312 full thd

NSN
رقم المخزون الوطني:
3040-00-429-8633 3040004298633
TXT
وصف:
Shouldered Shaft
INC
INC
رمز اسم العنصر:
22914
INC
COM
امتثال:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Tongue rounded ends
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Unthreaded cross drilled
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.906 inches
MRC:
None.AMDJ
First End Tongue Thickness:
Between 0.184 inches and 0.186 inches
MRC:
None.AMDK
First End Tongue Width:
0.250 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.3120 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.3125 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1280 inches and 0.1310 inches
MRC:
None.AMGT
Second End Distance From Hole Center To End:
0.156 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Amdl and amfz and amgs
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
0.313 inches
MRC:
None.CSQZ
First End Step Length:
1.344 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-582 assn standard single material response

{lang[cimilar]} Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى