رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
75wagl-4400-2-lh
TXT
وصف:
Marine Propeller
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.999 inches and 1.005 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.402 inches and 0.405 inches
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
1
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
Between 12.250 inches and 12.375 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Onboard 75 ft wlic coast guard vessels
MRC:
The number of individual blades included.AJLB
Blade Quantity:
5
MRC:
An indication of the type of propeller.AMWD
Propeller Type:
Fixed pitch
MRC:
The direction in which an item is designed to rotate,when viewed axially.AMWW
Rotation Direction:
Left-hand
MRC:
The maximum allowable diameter of the circle produced by the extreme tip of the item.AMWY
Span Maximum Diameter:
3.667 feet
MRC:
The mean distance of forward movement for each revolution of the item.AMXB
Design Pitch:
4.167 feet
MRC:
An indication of the type of blade pitch.AMXG
Blade Pitch Type:
Constant
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub shaft accommodation.AMYP
Hub Shaft Accommodation Style:
Taperbore w/ keyway
Hublength:
Between 12.875 inches and 13.000 inches
Hub Forward Face Diameter:
Between 6.750 inches and 6.875 inches
Hub Aft Face Diameter:
6.750 inches
MRC:
The length of a straight line which passes through the center of the largest portion of a tapered bore,and terminates at the circumference.ANAL
Taper Bore Major Diameter:
Between 4.750 inches and 4.752 inches
MRC:
The length of a straight line which passes through the center of the smallest portion of a tapered bore,and terminates at the circumference.ANAM
Taper Bore Minor Diameter:
Between 3.542 inches and 3.544 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Manganese bronze blades
