رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One external reinforcing rib centered along length 0.380 in. Thk; spot face all mtg holes 0.562 in. Dia; one threaded hole in side wall 0.875-14unf-2b
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Square or rectangular recess
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.290 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
6.120 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.380 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.260 inches
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
Between 4.090 inches and 4.150 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
Between 6.200 inches and 6.290 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.380 inches
Hole Quantity Along Length:
8
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
1.940 inches
Distance Between Holes Along Width:
1.820 inches
Distance Between Hole Centerline And First Hole Along Length:
0.920 inches
Distance Between Hole Centerline And First Hole Along Width:
0.940 inches
Distance From First Hole Centerline To End Along Length:
1.220 inches
Distance From First Hole Centerline To End Along Width:
1.240 inches
First Recess Inside Height:
5.820 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.250 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.380 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-b-24480 military specification single material response
