رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Wfirst gear 1.78125 in. Pitch dia; 57 teeth 14.500 degrees involute x 0.380 in. Thk; second gear 1.4275 in. Pitch dia; 42 teeth 14.500 degrees involute x 0.135in. Thk; third gear 1.000 in. Pitch dia; 16 teeth 14.500 degrees involute x 0.500 in. Thk
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Plain second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
W/counterbore first counterbore first end
MRC:
Indicates the design type of the item.APGF
Design Type:
Spur all gears
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
56.0 rockwell c or 60.0 rockwell c
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
1.125 inches fourth gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
1.495 inches third gear
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
1.843 inches second gear
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.473 inches
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.135 inches between first and second gear
MRC:
A nominal measurement of the longest dimension of the hub,in distinction from width.CWQN
Hub Length:
0.370 inches between second and third gear
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.626 inches second end
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
1.213 inches first counterbore first end
MRC:
A nominal measurement between specified points of the counterbore,in distinction from height.CWTB
Counterbore Depth:
0.291 inches second end
MRC:
The nominal length of a straight line which passes through the center of the counterbore,and terminates at the circumference.CWTG
Counterbore Diameter:
1.313 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 al 4150 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-12011 fn 22.04 gr 1 military specification single treatment response
