رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Item requires 15 screws, 11 has p/n 583r645h21, 4 p/n 583r645h24; 9 of the holes have diameter 0.321 to 0.328 in, and are csk 82 degrees porm 5 degrees to 0.505 in. Plus 0.010 in. Diameter near side & cbored 0.030 in. Dp to a diameter 0.440 in. Porm 0.020 in. On far side & 6 of the holes has diameter of 0.321 to 0.328 in. S.F. 0.530 in. Plus 0.020 in. Diameter bothsides, csk 82 degrees porm 5 degrees to diameter 0.505 in. Plus 0.010 in. Near side
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
11.480 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
24.420 inches
Hole Quantity Along Length:
9
Hole Quantity Along Width:
6
Distance Between Holes Along Length:
3.750 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.400 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.190 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Alq-131
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Special marking
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/25a t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate and primer and paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, cl 1a military specification 1st treatment response and mil-p-23377 military specification 2nd treatment response and mil-c-83286 color no. 34088 military specification 3rd treatment response
