رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Nitride harden case depth 0.003 to 0.006 inch, except second end taird portion. Both ends chamfered 0.030 in. by 45 deg.
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.761 inches
MRC:
The number of threads on the worm.CFFB
Worm Thread Quantity:
2
MRC:
The distance a worm thread advances axially in one complete turn.CFFC
Worm Thread Lead:
0.1321 inches
MRC:
The direction of the worm thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CFFD
Worm Thread Direction:
Right-hand
MRC:
The pressure angle of the worm,expressed in degrees.CFFF
Worm Pressure Angle In Deg:
14.500
MRC:
The angular amount the worm is inclined.CFFG
Worm Helix Angle:
7 degrees 45 min 25 sec
MRC:
The length of a straight line which passes through the center of the worm,and terminates at the outside circumference.CFFK
Worm Outside Diameter:
0.3507 inches
MRC:
A measurement indicating the diameter-pitch per measurement scale of the worm.CFFL
Worm Pitch Diameter:
0.3087 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis of the worm.CFFN
Worm Thread Section Length:
Between 0.490 inches and 0.510 inches
MRC:
A measurement of the longest dimension of the worm body,in distinction from width.CFFP
Worm Body Length:
Between 0.490 inches and 0.510 inches
MRC:
An indication of whether or not the worm body end/s/ is provided with a tapered bearing surface.CFFQ
Worm Body Tapered Bearing Surface End:
Not provided
MRC:
Indicates the location of the shaft(s) on the item.CFFW
Shaft Location:
Both ends of worm
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.151 inches first end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.151 inches second end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.161 inches first end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.161 inches second end, second portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.415 inches first end, first portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.615 inches second end, first portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.635 inches second end, first portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.909 inches second end, third portion
MRC:
A measurement of the longest dimension of the straight unthreaded portion of the item,in distinction from width.CFFX
Straight Unthreaded Length:
0.904 inches second end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1562 inches second end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1566 inches second end, third portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1876 inches first end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1876 inches second end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1873 inches first end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.1873 inches second end, second portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.240 inches second end, first portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.240 inches first end, first portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.260 inches first end, first portion
MRC:
The length of a straight line which passes through the center of the straight unthreaded section,and terminates at the circumference.CFFY
Straight Unthreaded Section Diameter:
0.260 inches second end, first portion
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Cffc and cffk and cffl and cffy
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, nitralloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel, nitralloy
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Black oxide, mil-c-13924, class 3
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Black oxide, mil-c-13924, class 3
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Telescope, panoramic m100s
