رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Headless Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Oval
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.846 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.1567 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.147 inches
Undercut Diameter:
Between 0.123 inches and 0.127 inches
Undercut Width:
Between 0.366 inches and 0.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
Between 0.046 inches and 0.051 inches
Second Hole Diameter:
Between 0.046 inches and 0.051 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.070 inches and 0.085 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 0.706 inches and 0.716 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 35.0 rockwell c
MRC:
Indicates the location of the first end.CRDY
First End Location:
Both ends
First End Outer Radius:
Between 0.125 inches and 0.131 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1095 or steel comp 416
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-675 assn standard single material response or ams 5610 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese or passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-16232, type m, class 1 with vv-l-800 oil treatment military specification single treatment response or qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove