رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Thd point flatted to 0.260 in. W by 0.160 in. Lg, top of head partially beveled to 30.0 deg
TXT
وصف:
Externally Relieved Body Bolt
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.560 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
2.270 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.620 inches and 0.630 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.190 inches
Distance From Centerline To Flat:
Between 0.240 inches and 0.250 inches
First Diameter From Head:
Between 0.316 inches and 0.321 inches
Second Diameter From Head:
Between 0.3805 inches and 0.3810 inches
Third Diameter From Head:
Between 0.3695 inches and 0.3735 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.630 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
Between 1.094 inches and 1.157 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
Between 1.469 inches and 1.595 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 34.0 rockwell c
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8740
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
