رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Optical Element Retainer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 1.457 inches and 1.462 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.247 inches and 0.253 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
4
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 1.541 inches and 1.543 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
Between 0.122 inches and 0.128 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.079 inches
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
1.874 in.-32
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.250 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Telescope
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Drilled hole
MRC:
The angular spacing between drive facilities,expressed in degrees.BMTN
Drive Facility Angular Spacing In Deg:
90.0
MRC:
A measurement of the distance from the geometric axis to the hole center.BMTP
Radius From Geometric Axis To Hole Center:
Between 0.856 inches and 0.862 inches
MRC:
The design of the guide on the item.BMTQ
Guide Design:
Thread chamfer
MRC:
Indicates the location of the guide on the item.BMTR
Guide Location:
Both edges
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
Hole Chamfer Angle In Deg:
0.0
Hole Chamfer Diameter:
Between 1.457 inches and 1.462 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Anodized black
