رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Counterbored aperture; 2 additional mounting holes in base; 4 equally spaced 0.531 diameter mounting holes on a 6.000 diameter bolt circle
TXT
وصف:
Bearing Unit Housing
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.625 inches and 0.626 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 5.0000 inches and 5.0010 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
6.000 inches
Housing Height:
11.300 inches
MRC:
A measurement taken at right angles to the length of a housing,in distinction from thickness.AFWE
Housing Width:
Between 13.938 inches and 14.062 inches
MRC:
Indicates the type of fitting used to lubricate the item.AGKL
Lubrication Fitting Type:
Flush
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Open
Height From Bottom Of Base To Bore Centerline:
5.650 inches
MRC:
The angle of the lubrication fitting from the horizontal centerline of the item.CWGR
Lubrication Fitting Angle From Horizontal Centerline:
90.0 degrees
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304 or steel comp 1009
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-766 federal specification 1st material response and qq-s-698 federal specification 2nd material response
