رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
803-4385059piece78
معلومات الجزء
2 additional holes on face
TXT
وصف:
Bearing Retaining Plate
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Raised surface w/aperture
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.7500 inches
Minor Thickness:
0.1155 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.4200 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
1.3125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
4
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
1.3750 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
3.3120 inches
MRC:
The length of a straight line which passes through the center of the countersink,and terminates at the circumference.AYRZ
Countersink Diameter:
0.2187 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
0.8375 inches
MRC:
The included angle of the countersink.CRSQ
Countersink Angle:
82.0 degrees
Counterbore Diameter:
Between 1.5005 inches and 1.5015 inches
Counterbore Depth:
1.2500 inches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round, unthreaded, countersunk
Outside Raised Surface Diameter:
Between 2.8740 inches and 2.8750 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 510 or copper alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-b-750 federal specification 1st material response or qq-c-00465, alloy 632m federal specification 2nd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
