رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Weapon system essential; junction pattern arrangement: npn
MRC:
The element,compound,or mixture of which the inclosure is fabricated,excluding any surface treatment.ABBH
Inclosure Material:
Metal
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.553 inches and 1.573 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.250 inches and 0.450 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.050 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
S-3b viking, p-3 orion aircraft.
MRC:
The number of mounting facilities provided.AKPV
Mounting Facility Quantity:
2
MRC:
An indication of the internal basic form of the item.ALAS
Internal Configuration:
Junction contact-darlington connected
MRC:
The alpha-numeric symbol assigned by the electronic industries association,to registered physical configurations of the cases for electronic items.ALAZ
Joint Electronic Device Engineering Council/jedec/case Outline Designation:
To-3
MRC:
The electrode which is internally-electrically connected to the case of the item.ALBA
Electrode Internally-electrically Connected To Case:
Collector
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Hermetically sealed case and burn in
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the semiconductor is fabricated.CTMZ
Semiconductor Material:
Silicon
MRC:
The value of the voltage that may be applied,expressed in volts,and the symbol used to identify the specific electrical characteristic.CTQN
Voltage Rating In Volts Per Characteristic:
450.0 collector-to-emitter substaining voltage, with specified circuit between base and emitter and 400.0 collector-to-emitter, substaining voltage, base open-circuited and 500.0 collector to emitter saturation voltage
MRC:
The level of electrical flow and the symbol used to identify the specific electrical characteristic.CTQX
Current Rating Per Characteristic:
20.00 amperes zero-gate-voltage source current blank and 2.50 amperes zero-gate-voltage source current of standard range
MRC:
The amount of electrical power that can be dissipated and the specific electrical characteristic.CTRD
Power Rating Per Characteristic:
175.0 watts small-signal input power, common-collector absolute
MRC:
The maximum temperature at which the item is designed to operate at each measurement point.CTSG
Maximum Operating Tempurature Per Measurement Point:
200.0 degrees celsius junction
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
96214-807721 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
1 case and 2 pin
