رقم الجزء 81037

Flexible Drive Shaft
توافر المخزون  رموز حالة المنتج

رقم الجزء 81037 في المخزون بالكميات والشروط التالية.

  • AR: 1
  • NS: 15
  • SV: 1
  • NE: 50

ملاحظة: تم آخر تحديث لتوفر هذا المنتج 02/01/2021 وربما تغيرت منذ ذلك الحين. اطلب عرض أسعار للأسعار المحدثة والتوافر.

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
81037
تجريد:
No
صلاحيه:
وحدة القياس:
NIIN:
005405432
NSN
رقم المخزون الوطني:
3040-00-540-5432 3040005405432
TXT
وصف:
Flexible Drive Shaft
INC
INC
رمز اسم العنصر:
20367
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.188 inches err-100
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
9.125 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.150 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
0.938 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
2.000 inches
MRC:
The element,compound,or mixture of which the shaft is fabricated.ANBM
Shaft Material:
Steel
MRC:
A designation indicating the size by which the item is commercially known and/or identified.APGG
Size Designator:
0.750 in. Across flats
MRC:
Indicates the type of unit.APQB
Unit Type:
Wire wound
MRC:
Indicates the type of end.APTD
End Type:
Gear
MRC:
Indicates the type of end.APTD
End Type:
Round, internal splined
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
48
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
14.500
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.250 inches
MRC:
A measurement of the distance from one side to the opposite side of the cross section of an item and the location.CFQW
Cross Section Size And Location:
0.406 inches diameter
MRC:
The number of unthreaded securing holes provided.CFRC
Err Default:
Err default
MRC:
The number of unthreaded securing holes provided.CFRC
Unthreaded Securing Hole Quantity:
2
MRC:
Indicates the location of the unthreaded securing hole(s) on the item.CFRD
Err Default:
Err default
MRC:
Indicates the location of the unthreaded securing hole(s) on the item.CFRD
Unthreaded Securing Hole Location:
Spaced 1-1/2 in. C to c approx, one hole offset 5/16 in. Approx

{lang[cimilar]} Flexible Drive Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى