رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.406 inches first end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
4.2500 inches second end
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.7500 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.825 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
12.372 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
2.7660 inches through bore
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.5025 inches through bore
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.2990 inches through bore
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABVK
Thread Size Designator:
3/8-16 second end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
2.8250 inches through bore
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Tapered both ends
MRC:
Indicates the design type of the item.APGF
Design Type:
Insert
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 through bore
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway through bore
MRC:
The means by which the item is secured.BSNP
Securing Method:
Threaded hole second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole first end
MRC:
The number of threaded holes provided.BSNQ
Threaded Hole Quantity:
3 second end
MRC:
Indicates the location of a threaded hole on the item.BSNR
Threaded Hole Location:
Second end: through body at counterbore
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
8 first end
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
First end: through flange
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The length of a straight line which passes through the center of the largest portion of the taper,and terminates at the circumference.CFGD
Taper Largest Diameter:
2.8750 inches through bore
MRC:
The chemical compound or mechanical mixture properties of which the insert is fabricated.CQZG
Insert Material:
Rubber
