رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Center hole 0.688in. Diameter and white enamel
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Any acceptable
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
3.031 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
3.250 inches
Second Leg Width:
1.063 inches
Second Leg Corner Radius:
0.1250 inches
First Leg Hole Diameter:
0.188 inches
Second Leg Hole Diameter:
0.219 inches
Second Leg Distance Between Hole Centers Along Length:
2.500 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.188 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.2500 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.1196 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.1196 inches
First Leg Width:
1.0630 inches
First Leg Corner Radius:
0.1250 inches
First Leg Distance Between Lower Hole Centers Along Width:
0.5312 inches
First Leg Distance Between Hole Centers Along Length:
0.3430 inches
First Leg Distance Between First And Second Hole Centers Along Width:
0.3430 inches
First Leg Distance From Edge To Hole Center Along Width:
0.5310 inches
First Leg Distance From Edge To Hole Center Along Length:
0.218 inches
First Leg Distance Between First And Second Hole Centers Along Length:
0.906 inches
First Leg Distance Between Second And Third Hole Centers Along Length:
0.906 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
Second Leg Offset Angle:
80.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset angle
