رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
16 serrations equally spaced on periphery; 0.112-40unc-2b securing hole0.125 in. From hub end; handle forest green
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.375 inches
MRC:
A measurement of the longest dimension of the handle,in distinction from width.AASN
Handle Length:
1.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.094 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.063 inches and 0.065 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.037 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6650-01-146-5000
MRC:
A measurement of the longest dimension of the hub,in distinction from width.AJLJ
Hub Length:
0.563 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handle.ALMP
Handle Style:
Recessed flat
MRC:
The length of a straight line which passes through the center of the hub,and terminates at the outside circumference.ALNC
Hub Outside Diameter:
0.687 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum alloy, qq-a-601, alloy 356, t6 wheel err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Brass, qq-b-626, alloy 360, 1/2h handle err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Anodized wheel err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Enamel, tt-e-529 handle err-100 err-100
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Enamel, tt-e-529 handle pin err-100 err-100
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity,and its location on the item.AWJT
Color And Location:
Brown
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the handwheel.AWJX
Handwheel Style:
Disk
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the drive facility.AWJY
Drive Facility Style:
Single keyway
MRC:
The means used to attach the handle to the item.AWKC
Handle Mounting Method:
Rivet
MRC:
An indication of whether or not a handle rotating feature is included.AWKD
Handle Rotating Feature:
Not included
MRC:
An indication of whether or not a weight is included to offset the weight of the handle.AWKE
Handle Counterbalancing Weight:
Not included
MRC:
An indication of whether or not a ratchet is included.AWKF
Ratchet:
Not included
