رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One 0.250 in. Diameter hole 0.250 in. Deep drilled axially in one end, centered 1.343 in from horizontal center line and located 180 degrees from centerline of retaining holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Chamfered ends
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
30.0
MRC:
A measurement between specified points of the hole,in distinction from height.AAZQ
Hole Depth:
0.8430 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 3.68400 inches and 3.68500 inches
End Chamfer Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Two holes through one side of bore
First Hole Diameter:
0.875 inches
Second Hole Diameter:
0.875 inches
Distance From Centerline Of Hole To End Of Pin:
1.812 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 2.4950 inches and 2.5050 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
2.0000 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 6.1150 inches and 6.1350 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
58.0 rockwell c
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Inside chamfer straight-thru bore
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi/sae 8620
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard single material response or aisi 8620 assn standard single material response or sae 8620 assn standard single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine, diesel
