رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Hardness 63 min to 77 maximum durometer, shore a
TXT
وصف:
Electronic Shielding Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Emi
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.120 inches and 0.171 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.797 inches and 0.827 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-60.0 degrees celsius and 200.0 degrees celsius
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.797 inches and 0.827 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
Between 0.485 inches and 0.515 inches
Outside Corner Radius:
Between 0.094 inches and 0.124 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 0.579 inches and 0.609 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 0.579 inches and 0.609 inches
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.203 inches and 0.233 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.203 inches and 0.233 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.020 inches and 0.040 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
Indicates the location(s) at which the environmental protection material is joined to the electromagnetic interference/radio frequency interference (emi/rfi) material.CTNJ
Environmental Protection Material Location:
Throughout rf shielding gasket
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q environmental seal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Silver emi/rfi conductor
MRC:
An indication of the precious material and its location in the item.PMLC
Precious Material And Location:
Emi/rfi conductive particles silver
MRC:
Identification of the precious material contained in the item.PRMT
Precious Material:
Silver
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
