رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
All corners chamfered 1/16 in. By 45 deg
TXT
وصف:
Wheel Spindle Kingpin
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Not casehardened
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.559 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.8635 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
0.125 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.250 inches
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.125 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
31.0 rockwell c and 35.0 rockwell c
MRC:
Indicates the type of retaining device used to safeguard the item against loss.AGEZ
Retaining Device Type:
Lockpin slot
MRC:
The distance from the nearest end to the center of the groove and/or slot.CFDG
Distance From Nearest End To Groove/slot Center:
2.625 inches
MRC:
An indication of whether or not a threaded securing end is included.CFDJ
Threaded Securing End:
Not included
MRC:
An indication of whether or not a screwdriver slotted end is included.CFDK
Screwdriver Slotted End:
Not included
MRC:
An indication of whether or not a lubrication fitting threaded hole is included.CFDL
Lubrication Fitting Threaded Hole:
Not included
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, mil-s-11415, class b2-canceled
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-11415, class b2-canceled military specification 1st material response
