رقم الجزء 8579537

Rod End Clevis

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 388.38 and 524.313 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
8579537
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
007713715
NSN
رقم المخزون الوطني:
5340-00-771-3715 5340007713715
TXT
وصف:
Rod End Clevis
INC
INC
رمز اسم العنصر:
03796
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
2.360 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.116 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 0.2492 inches and 0.2495 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.422 inches and 0.427 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.422 inches and 0.427 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
Between 0.216 inches and 0.222 inches
MRC:
The length of a straight line which passes through the center of a securing pin hole,and terminates at the circumference.AKYE
Securing Pin Hole Diameter:
0.116 inches
MRC:
The distance along a straight line from the rod connecting end at right angle to the geometric axis of the securing pin hole center.AKYH
Distance From Center Of Securing Pin Hole To Rod End:
0.156 inches
MRC:
None.AKYV
Distance From Pivot Pinhole Center To Rod Connection End:
2.969 inches
MRC:
None.AKYW
Fork Arm Thickness:
0.104 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.219 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Aaze
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis

{lang[cimilar]} Rod End Clevis

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى