رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
1st end has 2 keyways - no. 7 woodruff key cut in from end 5/64" deep as described and no. 9 woodruff key indented- 1 7/16" l x 3/16" w x 3/32" deep; 2nd end no. 9 woodruff key cut from end 5/64" deep; both ends threaded 32 unf-3a; nha alternating current motor
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Externally threaded and woodruff keyway
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Externally threaded and woodruff keyway
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.4375 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
0.1250 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.6586 inches and 0.6640 inches
First End External Thread Length:
0.3750 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
0.1875 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.7756 inches and 0.7810 inches
Second End External Thread Length:
0.4375 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
14
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.2310 inches and 1.2315 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1141
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-637 federal specification single material response or c 1141 assn standard single material response
