رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
25/64 in. Lg step to largest end, od, from 2-13/32 in. Dia
TXT
وصف:
Protection Bellows
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
2.312 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the outside circumference.AHMH
Small End Outside Diameter:
1.062 inches
MRC:
A numeric value that reflects the durometer scale hardness rating of a nonmetallic item.BMJT
Durometer Hardness Rating:
Between 45.0 and 55.0
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the inside circumference.CDDB
Large End Inside Diameter:
Between 1.922 inches and 1.953 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the inside circumference.CDDD
Small End Inside Diameter:
Between 0.797 inches and 0.828 inches
MRC:
An outside measurement of the longest dimension of the small end,in distinction from width.CPYF
Small End Outside Length:
Between 0.422 inches and 0.453 inches
MRC:
A measurement of the longest inside dimension of the large end,in distinction from width.CPYM
Large End Inside Length:
Between 0.141 inches and 0.172 inches
MRC:
A measurement of the longest dimension of an item when it is in a neutral position.CPYN
Neutral Length:
Between 2.984 inches and 3.016 inches
MRC:
A measurement of the longest outside dimension of the large end,in distinction from width.CPYS
Large End Outside Length:
Between 0.375 inches and 0.406 inches
MRC:
A measurement of the longest inside dimension of the small end,in distinction from width.CPYT
Small End Inside Length:
Between 0.172 inches and 0.203 inches
MRC:
A measurement of the smallest dimension between the ends of the item,in distinction from length or width.CPYW
Thickness Between Ends:
0.062 inches
MRC:
A measurement of the smallest dimension of both ends of the item,in distinction from length or width.CPYX
Thickness At Both Ends:
0.188 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-3065, class sb, 515cfpj military specification single material response
