رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Spacer, metal
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 11.430 inches and 11.490 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 2.610 inches and 2.670 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.075 inches and 0.105 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Conversion coate per mil-c-5541, calss 1a. Item contains 8 .196 diameter holes. 1st hole located .5 from rt edge &1.60 from bottom; 4th hole located 2.917 to lt of 1st hole on same centerline; 3rd hole located 1.08 rt of 4th hole & .274 below centerline of 4th hole; 2nd hole located .750 to rt of 3rd hole on same centerline as 3rd hole; 5th hole located on same centerline as 1sthole & is 5.834 to lt of 1st hole; 6thhole located 2.998 to lt of 5th hole &.352 below centerline of 5th hole; 7thhole located 4.746 lt of 5th hole & .842 below centerline of 5th hole; 8th hole 0ocated 4.928 to lt of 5th hole & .784 above centerline of 5th hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061 or aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t6 federal specification 1st material response or qq-a-250/11, t4 federal specification 2nd material response or qq-a-250/8, h3 federal specification 3rd material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
