رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Semi-closed channel
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
5500 kilograms per square centimeter
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.145 inches and 0.175 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.720 inches and 0.780 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
72.000 inches
Right Side Flange Height:
Between 0.145 inches and 0.175 inches
Left Side Flange Thickness:
Between 0.037 inches and 0.053 inches
Right Side Flange Thickness:
Between 0.037 inches and 0.053 inches
Left Side Top Flange Thickness:
Between 0.037 inches and 0.053 inches
Right Side Top Flange Thickness:
Between 0.037 inches and 0.053 inches
Left Side Top Flange Width:
Between 0.085 inches and 0.115 inches
Right Side Top Flange Width:
Between 0.085 inches and 0.115 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Warp/twist
Base Flange Thickness:
Between 0.037 inches and 0.053 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyvinyl chloride
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
L-p-1035, comp a, type2, grade e federal specification single material response
