رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
One additonal mtg hole 0.180 in. Diameter in first leg
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Stamped
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.734 inches and 0.766 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.734 inches and 0.766 inches
Second Leg Width:
Between 9.734 inches and 9.766 inches
Second Leg Corner Radius:
Between 0.234 inches and 0.266 inches
First Leg Hole Diameter:
0.180 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 4.859 inches and 4.891 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.273 inches
Second Leg Slot Length:
Between 9.422 inches and 9.469 inches
Second Leg Slot Width:
Between 0.194 inches and 0.199 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.109 inches and 0.141 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.109 inches and 0.141 inches
First Leg Width:
Between 9.734 inches and 9.766 inches
First Leg Distance Between First And Second Hole Centers Along Width:
1.750 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
1.750 inches
First Leg Distance From Edge To Hole Center Along Width:
2.250 inches
First Leg Distance From Edge To Hole Center Along Length:
0.438 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
