رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Furnished with one nut, plain, blind rivet
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Stamped
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.990 inches and 1.010 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.615 inches and 0.635 inches
Second Leg Width:
Between 0.490 inches and 0.510 inches
First Leg Hole Diameter:
Between 0.194 inches and 0.214 inches
Second Leg Hole Diameter:
Between 0.194 inches and 0.214 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.240 inches and 0.260 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.240 inches and 0.260 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.054 inches and 0.074 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.054 inches and 0.074 inches
First Leg Width:
Between 0.049 inches and 0.510 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.240 inches and 0.260 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.240 inches and 0.260 inches
First Leg End Radius:
Between 0.240 inches and 0.260 inches
Second Leg End Radius:
Between 0.240 inches and 0.260 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5, alclad t3 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
