رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.152 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
12.270 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.030 inches
Hole Quantity Along Length:
6
Hole Quantity Along Width:
3
Distance Between Holes Along Length:
2.390 inches
Distance Between Holes Along Width:
2.418 inches
Distance Between Hole Centerline And First Hole Along Length:
0.150 inches
Distance Between Hole Centerline And First Hole Along Width:
0.150 inches
Distance From First Hole Centerline To End Along Length:
11.970 inches
Distance From First Hole Centerline To End Along Width:
0.142 inches
Corner Hole Centerline Radius:
0.337 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.142 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1025-01-445-0991, 155mm lightweight howitzer, towed
MRC:
Indicates the type of cut on the corner/s/.CKWB
Corner Cut Type:
Round
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Additional surface treatment is chemical conversion coat per a4955, class 1; epoxy primer coating is mil-p-53022, type 2 shown in detail b on drawing; paint primed surfaces per mil-c-46168d, green nbr 34094, tint nbr 383 iaw fed-std-5958; apply paint per mil-c-53072b
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer epoxy-polyamide and paint
