رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
90l130ka5nn80s4f1h04gba202024
معلومات الجزء
Axial piston variable displacement series 90 pump
TXT
وصف:
Axial Pistons Pump
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Frame
MRC:
Indicates the type of intake connection included on the item.AAYU
Intake Connection Type:
Round flange
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Hydraulic fluid
MRC:
Indicates the type of pumping element included on the item.AENG
Pumping Element Type:
Piston
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Uss frank cable
MRC:
The speed of the item required to produce its rated capacity.AHYZ
Operating Speed At Rated Capacity:
3100.00 revolutions per minute
MRC:
The position in which the pumping element/s/ is designed to operate.AHZA
Pumping Element Operating Position:
Horizontal
MRC:
The direction in which the pump shaft turns during operation.AHZD
Pump Rotation Direction:
Clockwise and counterclockwise
MRC:
Indicates the type of reciprocating movement within the item.AHZN
Reciprocating Stroke Type:
Variable
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Crane cgo x sail cap 10000 lbs. Product series: 90 closed circuit. Type and rotation: left hand pump. Displacement: 130 cc/rev (7.930 cubic inches per rev). Control: electrical displacement with ms connector. Pressure regulation: pressure limiter (pl) in port a and b below 450 bar (ref pib 2000-14). Auxiliary mounting pad: none (standard). Twin end cap ports. Filtration: suction (standard). Displacement limitation: limitation both sides (factory set at displacement). Shaft configuration: 13t 8/16 pitch. Charging system: 34 cc/rev (2.07 cubic inch/rev). Control orifice: .040 inch diameter. Special hardware features: standard valve plate 180 cc. High pressure setting for port a: 200 bar (2901 psi). High pressure setting for port b: 20 bar (2901 psi). Charge pressure setting: 24.133 bar (350 psi) (standard).
MRC:
The alpha-numeric-alpha designation used to identify the type and/or model of the basic item.TMDN
Type/model Designation:
90l130ka5nn80s4f1h04gba202024
