رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
2.500 in. Diameter by 0.500 in. In and 0.560 in. Maximum ht flange
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
9.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
1.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.436 inches all holes and 0.443 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
8
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 1.640 inches and 1.655 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Located on 7.375 in. Bolt circle dia
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Raised surface and aperture
MRC:
The length of a straight line which passes through the center of a raised surface,and terminates at the circumference.CKSP
Raised Surface Diameter:
Between 5.990 inches and 6.000 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
Between 0.190 inches and 0.250 inches
MRC:
The physical configuration of the aperture.CKSX
Aperture Shape:
Hexagon
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a240, cl 304, cond a assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The physical configuration of the item.SHPE
Shape:
Round
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35, type 1 federal specification 1st treatment response or qq-p-35, type 2 federal specification 1st treatment response or qq-p-35, type 3 federal specification 1st treatment response
