رقم الجزء 918739-01

Wearing Ring

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 8359.754 and 10931.986 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
918739-01
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
006727504

معلومات الجزء
Grooved on external flange 0.750 in. Diameter by 1.375 in. Deep with 0.312 in. Radius at closed end on a 10.250 in. Diameter center line of groove

NSN
رقم المخزون الوطني:
4320-00-672-7504 4320006727504
TXT
وصف:
Wearing Ring
INC
INC
رمز اسم العنصر:
22534
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.750 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 11.621 inches and 11.623 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 8.875 inches and 8.878 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.750 inches inside right corner
MRC:
None.ADXL
Left Side Flange Thickness:
0.375 inches
MRC:
None.ADXM
Right Side Flange Thickness:
0.375 inches
MRC:
None.AGRS
Distance Between Flanges:
Between 1.005 inches and 1.007 inches
MRC:
None.AYRE
Internal Flange Inside Diameter:
7.625 inches
MRC:
None.AYRG
Internal Flange Width:
0.375 inches
MRC:
None.AYRK
Smallest External Anchor Flange Radius:
6.031 inches
MRC:
None.AYRL
Largest External Anchor Flange Radius:
6.281 inches
MRC:
None.AYRM
Distance Below Centerline:
0.094 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all surfaces
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy

{lang[cimilar]} Wearing Rings

« Power and Hand Pumps {lang[catalog]}
قارن الآن»
واضح | أخفى