رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Furnished with one nut, self-locking and one rubber strip
TXT
وصف:
Double Angle Bracket
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Stamped
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.602 inches and 0.642 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 4.290 inches and 4.330 inches
Second Leg Width:
Between 0.480 inches and 0.520 inches
First Leg Hole Diameter:
Between 0.268 inches and 0.271 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.230 inches and 0.270 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.225 inches and 0.265 inches
Second Leg Slot Length:
Between 0.350 inches and 0.390 inches
Second Leg Slot Width:
Between 0.194 inches and 0.204 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.059 inches and 0.065 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.059 inches and 0.065 inches
Center Section Height:
Between 3.910 inches and 3.950 inches
Center Section Width:
Between 0.480 inches and 0.520 inches
Center Section Thickness:
Between 0.059 inches and 0.065 inches
First Leg Width:
Between 0.480 inches and 0.520 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.230 inches and 0.270 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.230 inches and 0.270 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One slot
First Leg Angle:
90.0 degrees
Second Leg Angle:
90.0 degrees
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
H-14 strain hardened, 1/2 hard
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Double angle
