رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The physical configuration of the body when viewed in cross section.AAWN
Body Cross-sectional Shape:
Flat
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
29.400 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.120 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.620 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Two holes 29.032 in. C to c; 23 0.093 in. To 0.099 in. Diameter holes, four 0.170 in. To 0.176 in. Diameter holes countersunk 0.280 in. To 0.285 in. Diameter by 100 degrees near side and one 0.193 in. To 0.199 in. Diameter hole countersunk 0.370 in. To 0.380 in. Diameter by 100 degrees far side, holes unevenly spaced
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-502, 1/2h federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-t-10727, type 1 military specification single treatment response
