رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
2nd leg has curved arch 2.800 in.L along width
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Gusset both sides
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F101 engine
Second Leg Width:
4.320 inches
First Leg Hole Diameter:
Between 0.274 inches and 0.288 inches
Second Leg Distance Between Hole Centers Along Width:
2.800 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.760 inches
Second Leg Slot Length:
0.600 inches
Second Leg Slot Width:
0.220 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.060 inches and 0.066 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.060 inches and 0.066 inches
First Leg Distance Between Hole Centers Along Width:
2.500 inches
First Leg Distance From Edge To Hole Center Along Length:
0.400 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
2 slots
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 625
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5599 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
