رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Rockwell c scale, 43 to 62 hardness
TXT
وصف:
Flexible Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.189 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.313 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.375 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.156 inches first end
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.156 inches second end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.0780 inches both ends
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.7490 inches second end and 0.7500 inches second end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.9990 inches first end and 1.0000 inches first end
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
1.1410 inches both ends
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Roller chain
MRC:
The number of keying facilities provided.BSGH
Keying Facility Quantity:
1 both ends
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway first end
MRC:
Indicates the type of keying facility provided.BSGK
Keying Facility Type:
Keyway second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole both ends
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2 both ends
MRC:
Indicates the location of an unthreaded hole on the item.BSNW
Unthreaded Hole Location:
Both ends: 90 degrees from keyway and parallel
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Keyway
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Water pump gasoline engine
