رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Compter interface module, cim iii
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.940 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.720 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.900 inches
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-32.0/+50.0 degrees celsius
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
30k and 60k generator
MRC:
An indication of how often the image is refreshed per second.AGLS
Image Refresh Rate In Hertz:
60.0
MRC:
Indicates the type of display provided.BFQN
Display Type:
Liquid crystal
MRC:
The design of the unit.CPLR
Unit Design:
Panel mounted
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Nhcf
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
24.0 dc
MRC:
Indicates the type of interface(s) available for input/output communications.CYEC
Interface Type:
Db9
MRC:
Indicates the highest monitor display capability.CYHR
Highest Display Capability:
Vga
MRC:
The length of a straight line that runs from one corner of the display screen to the other corner,expressed in inches.CYHS
Diagonal Display Size In Inches:
10.4
MRC:
Indicates the display resolution,expressed in the number of pixels per horizontal line by the number of lines on a vertical plane.CYMC
Display Resolution:
640 horizontal and 480 vertical
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
The mating signal connector is an amp inc. Pin 749111-8 nsn 5935-01-464-9307, (96-23553) 100 pin d-sub-minture with an amp inc. Backshell p/n 749081-1 nsn 3040-01-053-4490 (96-23552). The mating power connector is a d-subminiture, 9 pin female with .112-40 unc-2b male jack screws (96-23533). Next higher assembly 96-23504 used on 96-23500 and 96-23502 and 96-26505 used on 96-23501 and 96-23503
MRC:
An indication of the nuclear hardness criticality of the item.NHCF
Nuclear Hardness Critical Feature:
Hardened
MRC:
The measured weight of an item unencumbered by packaging or packing material.PKWT
Unpackaged Unit Weight:
16.000 pounds
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
Qtp-23747 standard (includes industry or association standards, individual manufactureer standards, etc.).
