رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
length is 3.5 inches; threads per mil-s-8879; sharp external corners shall have a .005 to .015 inch radius or .005 inch by 45 degree chamfer; heat treat to 160-180 ksi per mil-h-6875; solid film lube all surfaces per mil-l-46010, exept threads; magnetic particle inspection per astm e 1444; shoulder 0.047 inches wide; small end diameter 0.332 ly
TXT
وصف:
Threaded Tapered Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Radius
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.406 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
Between 2.860 inches and 2.891 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 0.191 inches and 0.201 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
0.625 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Actuator horn, rudder, freedom fighter f-5 aircraft
MRC:
The measured distance from a fixed point to a variable point on a curve or curved surface.ALWS
Second End Corner Radius:
Between 0.484 inches and 0.516 inches
First End Taper Length:
0.027 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
The amount of taper measured parallel to the longitudinal axis of the item per specific measurement scale.CQRR
Taper:
0.500 per foot in inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
Angle Between Centerline Of Holes:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-6758, condf4 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Dod-p-16232, typem, cl3, ortyper type z, cl 3 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Threaded at small end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
