رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Color green federal standard 595 no. 34151 outside first leg only
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.810 inches and 0.830 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 1.858 inches and 1.898 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Gusset both sides
First Leg Hole Diameter:
Between 0.159 inches and 0.164 inches
Second Leg Hole Diameter:
Between 0.204 inches and 0.210 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.320 inches and 0.340 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.073 inches and 0.087 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.073 inches and 0.087 inches
First Leg Distance Between Hole Centers Along Width:
1.000 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.820 inches and 0.840 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.320 inches and 0.340 inches
Second Leg End Radius:
Between 0.320 inches and 0.340 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius and tapered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5512 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
