رقم الجزء 97008A8061-8

Electronic Shielding Gasket

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 51.04 and 68.904 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
97008a8061-8
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
014947707

معلومات الجزء
Material consil-a compound n0.895; elastomer binder: silicone; conductive filler: silver plated aluminum particles; volume resistanc (max): .008 ohm-cm; hardness (shore a): 65 +/- 7 in accordance with astm d-2240; tensil strength(min): 200 psi in accordance with astm d-412; elongation to break (min/max)100%/300% in accordance with astm d--412; tear strength(min) : 30 ppi in accordance with astm d-624; recommended compression: 100 psi with deflection of 6% of original gasket height; emi shielding performance tested in accordance with mil-g-83528.Paragraph 4.6.12

NSN
رقم المخزون الوطني:
5999-01-494-7707 5999014947707
TXT
وصف:
Electronic Shielding Gasket
INC
INC
رمز اسم العنصر:
20281
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.125 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 160.0 degrees celsius
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.030 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
0.875 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
7010-01-391-0168
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.156 inches
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Blue
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
01365-97008a8061 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

{lang[cimilar]} Electronic Shielding Gaskets

« Miscellaneous Electrical and Electronic Components {lang[catalog]}
قارن الآن»
واضح | أخفى